How to Read Date on Ludwig Standard Snare
Logos on Ludwig Standard Other Projects - Papers and Articles - include:
1. A look at vii documented variations of the Gretsch Round Badge used from the 1930s until near 1969.
2. A look at serial number ranges for Ludwig factory born-together drum sets from the 1960s and 1970s.
iii. A search for the impetus for the use of serial numbers in vintage American made drums. Published in June 2020 Non So Modern Drummer online magazine
iv. A study of the frequency of each day of the week from Ludwig date stamps. Published in May 2020 Not So Modern Drummer online magazine.
5. A study of Ludwig's use of paper labels on master line and Standard drums in 1971/1972.
vi. An analysis of why so many Blue/Olive badge Ludwig drums are incorrectly dated as being from 1976.
seven. A look at serial number ranges for Gretsch manufactory built-in-together Round Badge drum sets.
eight. Timeline of Anti-Galvanic Stamps and Stickers on Vintage Ludwig Drums 1968-1984
nine. Logos on Ludwig Standard Throw-Offs and Butt Ends
10. Vintage Ludwig Badges without Series Numbers
Project 1. Gretsch Round Bluecoat Variations
Some of the information available on the internet well-nigh Gretsch'due south utilize of badges appears to be incorrect. Contrary to some sources, Gretsch did not start using circular badges on their drums in 1883 when the visitor was founded. Round badges did non brainstorm to announced on Gretsch drums until approximately the 1930s. Round badges were used until most 1969. For almost four decades, Gretsch used octagonal (Stop Sign) and Foursquare badges on their drums. In about 2014, Gretsch reintroduced the round badge. Fastened is a paper which details some of the different variations seen in Gretsch circular badges from the 1930s through the 1960s. Much thanks to Nib Maley of classicvintagedrums.com and collector Jim Beebe for their assistance Click beneath to read the paper, but exercise non copy information technology in whole or in office. Contact me if you lot would like to purchase a re-create.
For a quick look, the vii badges documented in the paper are shown below:
Skinny Sticks Badge with Large Letters
This badge is a "Skinny Sticks" type generally seen on drums from the 1930s-1940s.
Skinny Sticks Badge with Textured Background
This example is of a different "Skinny Sticks" version of the bluecoat, with large clear lettering. This particular badge has a cheesecloth-like textured appearance, which was non shared past all badges with Skinny Sticks and big lettering. This is linked to the later 1940s and earlier 1950s.
Skinny Sticks Badge with Maker's Marking on Back
This "Skinny Sticks" version has a maker's mark on the back indicating that it was made by Robbins Company of Attleboro, MA. Considering most badges are even so fastened to their drums, it is unknown how many or what per centum of round badges have marker'due south marks on their backs. This also exhibits the cheesecloth-like texturing in the background of the badge. This mode is linked to the subsequently 1940s and earlier 1950s.
Skinny Sticks Badge with Smaller Messages
This instance of a later "Skinny Sticks" variation has a smaller and less articulate font and presents the "Drum Makers" phrase at a less severe arc than the prior version. This version was in use in the 1950s and early 1960s.
Thick Sticks Badge
This example is of the Thick Sticks" badge, which has thicker sticks than the "Skinny Sticks" versions. It revives a font of the "Drum Makers Since 1883" like to the ane originally used in the earlier version of the "Skinny Sticks" badge. There are several differences in the lettering and other characteristics
of the badge. This style is seen on drums in the 1960s.
Thick Sticks Badge, another variation
This is an example of a second variation of the "Think Sticks" badge. This version does not announced to be as prevalent equally the other Thick Sticks variation. This is also a 1960s style.
Copper Thick Sticks Badge
Although it is sometimes difficult to tell afterwards years of vesture, polishing and "restoration" efforts, round badges had mutliple different finishes. Yet, the vast majority of badges were not made of copper like this i. It appears that this is the same design as the 2nd Thick Sticks badge above, but it was not every bit deeply struck. A time for the use of this fashion of badge has not been established, but was likely in use in the 1960s.
Project 2. Brief Study of Serial Number Ranges of "Mill Born Together" Vintage Ludwig Drum Sets
This study is an attempt to gain a greater understanding of the actual distribution of series number ranges in vintage Ludwig sets purported to be factory born together so that a benchmark can exist established. A grouping of 437 reports of drum sets which announced to exist factory original born together sets is analyzed. Additional analysis of this data and expansion of the study to include Gretsch drums is planned.
Click here to read the paper, just exercise not copy it in whole or in part. Contact me if you would similar to purchase a copy.Contact Rick.
Project 4. Written report of Frequency of 24-hour interval of the Week on Ludwig Date Stamps
This is a written report of the frequency of each twenty-four hours of the week seen in Ludwig appointment stamps from late 1963 through tardily 1971. This may provide some insight into the production practices endured past Ludwig during this fourth dimension period. Click the tab below to read the paper (but no non copy information technology in whole or in office) or follow the link to to the version published in Not So Mod Drummer in May 2020 : https://world wide web.notsomoderndrummer.com/non-so-mod-drummer/2020/5/26/study-of-vintage-ludwig-engagement-stamps-to-determine-frequency-of-days-of-the-week?rq=GIER
Projection 5. Study of Ludwig's Apply of Paper Labels in Principal Line and Standard Drums in 1971/72.
This is a study of Ludwig'south use of newspaper labels in its drums in 1971/1972 fourth dimension period. Some had date stamps while others had a mysterious Appointment Code. This paper provides insight into interpretation of the Date Code, although a consummate explanation of the Engagement Lawmaking is all the same sought. This appeared in August 2020's Not So Modern Drummer. Click the tab beneath to read the paper (but no not re-create it in whole or in function) or follow the link to to the version published in Not So Modern Drummer world wide web.notsomoderndrummer.com/not-then-modern-drummer/2020/viii/29/ludwigs-use-of-paper-labels-in-19711972-date-stamps-and-engagement-codes
Project 7. Brief Report of Serial Number Ranges of "Factory Born Together" Vintage Gretsch Round Badge Drum Sets
This study is an attempt to gain a greater understanding of the actual distribution of series number ranges in vintage Gretsch Circular Badge sets purported to be factory born together so that a criterion can be established. Eighteen sets which possess reliable documentation of their "born-togetherness" are studied. In improver, a group of 304 reports of pulsate sets which are likely to be factory original born together sets is analyzed. This was posted in Non And so Modern Drummer on Dec six, 2020. Click the tab beneath to read the paper (merely no not copy it in whole or in office) or follow the link to to the version published in Not So Modern Drummer. https://world wide web.notsomoderndrummer.com/not-so-modern-drummer/2020/12/6/series-number-ranges-of-born-together-vintage-gretsch-round-badge-pulsate-sets
Project 8. Timeline of Anti-Galvanic Stamps and Stickers in Vintage Ludwig Drums 1968-1984
This article develops a timeline for the use of unlike Anti-Galvanic Stamps and Stickers used past Ludwig on its chrome plated drums from 1968-1984. The President of Reliable Plating Corp contributes some recollections about plating drums shells for Ludwig in Chicago. This was posted in Non So Modernistic Drummer on July 30,2021. Click the tab below to read the paper (but no not copy information technology in whole or in part) or follow the link to to the version published in Not So Modernistic Drummer. https://www.notsomoderndrummer.com/non-so-modernistic-drummer/2021/7/29/understanding-ludwigs-use-of-anti-galvanic-stamps-and-stickers-on-chrome-drums-1968-1984
Project 9. Logos on Ludwig Standard Throw-Offs and Butt Ends
Project 10. Vintage Ludwig Badges without Serial Numbers
This paper documents the use of badges without serial numbers on vintage Ludwig drums made subsequently 1963. This was offered to Not So Modern Drummer in Dec 2021 and is likely to be published before long. Click the tab beneath to read the paper (but no not copy information technology in whole or in part).
Source: https://gretschdrumdatingguide.com/other-projects.html
0 Response to "How to Read Date on Ludwig Standard Snare"
Postar um comentário